All calculation functions are available for both single pipe and TwinPipe and when the calculation results are complied with, a minimum design life of 30 years is ensured. If the calculation results exceed the allowable values, a warning is shown on the screen.
The calculation results are accompanied by graphics showing the location and number of expansions cushions. Calculations can be exported to a PDF file and saved. LOGSTOR Design Tool is based on the calculation methods and the design rules given in LOGSTOR Design Manual, which is based on optimization of technical and economic aspects.
By using the Design Tool, which complies with the LOGSTOR Design Manual, and by taking local conditions into account, it is ensured, that the designed bonded pipe system is on the level with the static requirements in the European standard EN13941. This compliance means that dimensions up to and including DN 300 can be designed with this Design Tool as documentation.
The Design Tool calculations are only guiding for dimensions larger than DN300.
Start by selecting the type of pipe calculation you want to calculate foam pads for: 80-90° bends, <80° bends, Z-bends, U-bends, or branches.
Enter your system design parameters. Calculations for foam pads are based directly on the values you provide in this step.
Enter pipe lengths as the distance to the virtual anchor (total length between expansion bends divided by 2) for balanced expansion on both sides of the anchor.
The tool calculates expansion and foam pad requirements. Warnings are displayed if the calculated expansion exceeds acceptable limits.
Use the multiple calculations table to create up to 10 calculations on a single page. Print and save them for easy reference.
To get in touch please contact us by using the details below or visit our contact page here
LOGSTOR Denmark Holding ApS
Danmarksvej 11
DK-9670 Løgstør
Denmark