SX-WPJoint, 90-180, FlexPipe
Component Number:
5031
Applicable Systems:
The FlexPipe
Description
The SX-WPJoint consists of:
1. Shrink sleeve with integrated mastic
2. Venting plugs
3. Weld plugs
Delivered in white PE-foil.
Store the shrink sleeve vertically.
Max. temperature during transport and storage: 60° C
Application
Shrink sleeve made of cross-linked PE (PEX) for foaming. The sleeve is shrinkable at both ends, and the foam holes are sealed with weld plugs.
Pre-install the shrink sleeve on the pipe prior to joining the service pipe.
The shrink sleeve can as a standard be reduced by one dimensional offset. See below table.
When installed on pipes with corrugated casing the sleeve ends are sealed with additional collars to be ordered separately.
Can be used in all normal soil types, where the groundwater table is constantly less than 0.5 m over the pipes.