End fitting, for foaming, TwinPipe
Component Number:
5700
Applicable Systems:
The Bonded TwinPipe
Description
The end fitting for foaming consists of:
1. Closed shrink sleeve
2. Open shrink wrap
3. Closure patch
4. Weld plugs
5. Venting plugs
Please note! Disposable valves with reduced bore from dimension 48.3 and bigger and disposable valves with full passage in all dimensions shall be placed so the valve bodies are not beside each other.
Irrespective of the service pipe dimension the end fitting is ordered according to the outer casing dimensions.
At disposable valves long end fittings are used. For casing dimensions 200 till 315 mm end fittings with length 1000 mm are used.
For all other casing dimensions with disposable valves please contact LOGSTOR.
Application
End fitting with a closed end is used for temporary termination in the ground. The outmost part of the end fitting is shrinkable.
The end fitting for TwinPipe is foamed.
Fixing bars must be used, if the end fitting is on a straight pipe section.