The SX-WPJoint consists of:
1. Shrink sleeve with integrated mastic
2. Venting plugs
3. Weld plugs
Delivered in white PE-foil.
Store the shrink sleeve vertically.
Max. temperature during transport and storage: 60° C
Application
Shrink sleeve made of cross-linked PE (PEX) for foaming. The sleeve is shrinkable at both ends for dimensions ø 90-450 mm and shrinkable in the entire length for dimensions ø 500-710 mm. The foam holes are sealed with weld plugs.
Pre-install the shrink sleeve on the pipe prior to welding the service pipe together.
The shrink sleeve can as a standard be reduced by one dimensional offset. See below table.
When installed on pipes with corrugated casing the sleeve ends are sealed with additional collars to be ordered separately.
