TSJoint, single pipe
Component Number:
5202
Applicable Systems:
The Bonded Single Pipe
Description
The TSJoint with mastic consists of:
1. T-joint
2. Mastic
3. Venting plugs
4. Weld plugs
5. Venting and expansion plugs
6. Collar
7. 45° or 90° connecting piece (to be ordered separately)
8. Open shrink wraps
The TSJoint EW consists of:
1. T-joint
2. Weld strips
3. Venting plugs
4. Weld plugs
5. Venting and expansion plugs
6. Collar
7. 45° or 90° connecting piece (to be ordered separately)
The accessories 2-4 are delivered separately in a plastic bucket.
Max. temperature during transport and storage: 40°C.
Application
T-joint for foaming, used to branch perpendicular to or parallel with the main pipe. The main pipe is made of weldable PE and the branch of cross-linked PE (PEX). The T-joint is shrinkable.
The main pipe is extrusion welded longitudinally, and then the ends are either shrunk onto the mastic tape and sealed with open shrink sleeves or welded with weld strips like the EWJoint.
The branch is shrunk onto the embedded mastic and sealed with a collar.
Foam holes are sealed with weld plugs in the main pipe and with expansion plugs in the branch.
As stated below the TSJoint can be used together with a hot tapping valve. The insulation thickness around the valve casing will be thinner.
TSJoint main pipe ø450 mm can be used as a saddle solution for outer casing
ø355 - ø560 mm.