Foam Pack
Component Number:
0700
Applicable Systems:
Insulating Joints
Description
Foam packs are supplied in insulation boxes. The box i.a. contains a foam pack folder, from which it appears which foam pack size to use for which casing joint, as well as a leaflet with addresses and safety instructions.
The total weight of the foam packs and the box is max. 20 kg.
Foam packs are not returnable.
The foam pack is marked with isocyanate (A) and polyol/cyclopentane (B), respectively, as well as their hazard symbols.
Product No., foam pack No., and production week also appear from the bag.
Application
Foam packs are used to insulate joints.
Foam packs are easy to apply and the fitter does not come into contact with the liquids.
After mixing and filling in the two foam liquids, an efficient insulation is formed which has the same properties as the rest of the pipe system. Foam packs comply with the requirements to materials in EN 253.
If 2 foam packs are required per casing joint, preparations must be made, so they can be filled into the joint immediately after each other. It may be an advantage to be 2 persons to carry out the task.
If 3 or 4 foam packs are required per casing joint, 2 foam packs must be filled in simultaneously. This requires that an additional venting hole be drilled. Remember to order an additional plug set.
Foam packs have a time limit for use of 18 months counting from the stated production week, provided they are stored correctly.